Pour the solution into the bottle. The plastic bottle does not need to be filled, but it can be filled up to 250 mL;

Put the plastic bottle on the spray gun and tighten it;

Press the switch button, and then press the spray system until the spray gun starts;

Adjust the spray intensity according to the environmental needs; align the objects and spray evenly, only a thin layer is required.

Clean the spray gun after use.

• Please keep a distance of 50cm to 1 meter when spraying (depending on the setting used)

• The spray gun should keep a certain vertical distance from the sprayed plate, run back and forth at a constant speed, and spray evenly from left to right and top to bottom.

• Spray a thin layer evenly on the surface. Remove large drops with a clean towel to avoid temporary markings.

• To prevent the spray gun from clogging, it is recommended to run a cleaning cycle for 20 seconds after each use.

• Connect spray gun directly into the power outlet. Do not use any high voltage adaptor over DC5V 1.5A. Using an apple charger will not charge the atomizer.

Model size: 202*67*213 mm

Model weight: 850g

Liquid Capacity: 380ml Spray

Battery capacity: 2600ma

Model voltage: DC5V 1.5A

•The company reserves the right of final decision for any damages caused by normal wear and tear, incorrect power supply, or misuse of product directions.

• If you need to return or exchange the goods, please contact our company to make an appointment first, and then bring the goods and documents in person for processing.